Tapcon Drill Size Chart

Tapcon Drill Size Chart – This size ensures a snug fit for the screw, allowing it to grip the masonry effectively and provide. Concrete anchors & tapcon drill bits | tapcon for decades, tapcon ® products have enabled professionals to get the job done right the first time, every time. 51 rows drill bit size (inches) socket size/ bit tip: A straight shank tapcon drill bit can be expected to drill 60 holes minimum to a 2 depth in 4,000 psi concrete.

Advantages works in all masonry base materials. It is essential to use the condrive tool and the correct drill bit to assure consistent anchor performance. The 5/32” tapcon drill bit comes in three lengths and the 1/4” tapcon drill bit comes in five lengths.

Tapcon+ screw anchors design information for anchors located in the sofit of concrete over steel deck floor and roof assemblies1,2,3,4,5 for si: Fixture hole size (inches) tcf316114:

Pilot hole diameter shall be 0.263” and drilled 1/4” longer than the necessary embedment. 26 feb, 2019 in product installation purchase tapcon’s here it’s import to use the correct drill bit for the installation of a tapcon concrete screw. The ideal drill bit size for a 5/16″ tapcon is generally a 1/4″ bit.

Allowable loads are based ultimate test load divide by 4. Tapcon® anchors performance tables anchor dia. The recommended drill bit size for a 1/4 tapcon screw is 3/16 inch.

(mm) f’c = 2000 psi (13.8 mpa) f’c = 3000 psi (20.7 mpa) f’c = 4000. Tapcon® concrete anchors easy, fast, and accurate. Hole tolerance is critical, and must.

What Size Drill Bit for 3 16 Tapcon?